UTILITY: Learning View (version 0.6a 03-21-09)

merchgod · **Joined:** Wed Mar 29, 2006 10:38 pm **Posts:** 5336

nh8991 wrote:

For the N/A ECUs, will EZ1E401H (2009 USDM Impreza AT 2.5i) have support, or is it one of the exceptions mentioned above?
Thanks in advance.

I don't have that ROM. Please post it if you would like support added for it to learning view.

merchgod · **Joined:** Wed Mar 29, 2006 10:38 pm **Posts:** 5336

kenny_ wrote:

I was looking in the supported ECUs and it seems like theres support for my ECU AZ1G400W (ADM 2009 WRX).
But when i try to load up LV it says my ECU is not supported. Is there anything i can do to get it working?

Thanks!

The "Supported ECUs" is for RomRaider, not Learning View. I do have that ROM so it will added in the update.

As far as the update to LV, I didn't have as much time as I thought I would recently. But it is coming along. Once done, it will be a lot easier for me to make updates.

james2010wrx · **Joined:** Mon May 23, 2011 4:08 pm **Posts:** 15

How about the 2010 USDM WRX??? This would be really helpful. AZ1G701V

SSBOXER · **Joined:** Thu Jul 09, 2009 3:28 pm **Posts:** 71

Do you have AZ1G800D already? Thanks

mixa · **Joined:** Sun Jan 10, 2010 2:22 am **Posts:** 11

merchgod wrote:

As far as the update to LV, I didn't have as much time as I thought I would recently. But it is coming along. Once done, it will be a lot easier for me to make updates.

do you have rom to support a2zjc00b ?

lgt · **Joined:** Fri Jul 18, 2008 3:37 pm **Posts:** 44

Is the A/F correction number the actual percentage the ECU applying to all cels in that range or is it an average of the corrections made to each cel in within that range?

dschultz · **Posted:** Mon Jun 13, 2011 5:26 pm

It is an average calculated from data collected across the range and then the correction is applied to any value within the range.

HsamehH · **Joined:** Sat May 02, 2009 1:25 pm **Posts:** 12

hey merchgod, is it possible for learning view to work with 2006 forester FXT 32bit ECU ? i tried to make it work but it doesn't work,i would love to test this effective application with the car

merchgod · **Joined:** Wed Mar 29, 2006 10:38 pm **Posts:** 5336

I do have AZ1G701V, A2ZJC00B, and AZ1G800D.

In a few weeks, I'll have a good chunk of time to dedicate to working on the new version of LV. Should have release candidate ready then.

merchgod · **Joined:** Wed Mar 29, 2006 10:38 pm **Posts:** 5336

HsamehH wrote:

hey merchgod, is it possible for learning view to work with 2006 forester FXT 32bit ECU ? i tried to make it work but it doesn't work,i would love to test this effective application with the car

Yes, it is possible, but you (or someone else with the exact same ECU) would have to pull the ROM with Ecuflash and submit it (if it hasn't already been submitted by someone). Keep in mind there can be multiple ECU versions for the exact same car, so your specific revision would have to be submitted.

Bill

2bfi · **Joined:** Fri Dec 25, 2009 8:46 am **Posts:** 93

Merchgod, please include the one for a 2011 EDM STI AZ1J500G. The image and definition have been submitted already. Thanks!

wagonpower · **Joined:** Sat Jun 25, 2011 12:10 pm **Posts:** 2

How can I submit this to you?

merchgod wrote:

HsamehH wrote:

hey merchgod, is it possible for learning view to work with 2006 forester FXT 32bit ECU ? i tried to make it work but it doesn't work,i would love to test this effective application with the car

Yes, it is possible, but you (or someone else with the exact same ECU) would have to pull the ROM with Ecuflash and submit it (if it hasn't already been submitted by someone). Keep in mind there can be multiple ECU versions for the exact same car, so your specific revision would have to be submitted.

Bill

MFB · **Posted:** Sat Jun 25, 2011 10:02 pm

My car is almost 3 years old. Since I bought the car, still patiently waiting for an update to LV to support AZ1G101N (09 forester xt edm). :-)

LV works great with the older subarus I tinker with, looking forward to have this work on my daily drive.

merchgod · **Joined:** Wed Mar 29, 2006 10:38 pm **Posts:** 5336

wagonpower wrote:

How can I submit this to you?

Just respond to this thread and attach the ROM you pulled with Ecuflash.

wagonpower · **Joined:** Sat Jun 25, 2011 12:10 pm **Posts:** 2

merchgod wrote:

wagonpower wrote:

How can I submit this to you?

Just respond to this thread and attach the ROM you pulled with Ecuflash.

This tool would be so helpfull at the moment.

Rom attached.

RomRaider

Forum rules

UTILITY: Learning View (version 0.6a 03-21-09)

Who is online