RomRaider

I use it when I have to compute for the cells in between any table, may it be across just one or several cells. It beats using manual computation or making a formula to fill in the "blanks".

I need more detail. What exactly are you trying to do, and what goes wrong?

Can you add the per cylinder compensation table to the editor? It adds up to .7 degrees to what has been worked on and that can cause some slight knock. I no longer zero out pcc.

On all of the ROMs I've seen, the PCC tables have different dimensions than the main tables, which would make it more complicated to integrate. Not impossible, but it would take a lot of time, and I'm pretty focused on other stuff these days.

PCC seems like something that should be tuned separately from the main maps anyway... I mean, after the main tables are dialed, then start fine-tuning per-cylinder. Tweaking both sets at once sounds like it would just make the process harder than it needs to be.

ok, that is complicated. Currently Im just subtracting PCC comp (transposed values in excel to match timing table x and y) from Timing I made from the editor when I put it back in the tables.

First off, thanks for this awesome utility! I use it for more than just timing, the smoothing works great with the SD ve table. That said, would it be possible to increase the decimal values out to 4, vice 2? Or maybe a separate 3d table utility for people like me? Thanks again.

Some people are going to need wider monitors to use four digits to the right of the decimal point.

EDIT: pre-release versions removed

I tried to smooth between 2 points and it flashes to 2 decimals, smooths, then shows 4 decimal points again, but the last 2 digits are 0, even if I populate them with something (ie.1.0555=1.0500). Thanks again.

Sorry about that. I think I know where the problem is, and I'll take a look at it in the next day or two.

Just had a go at this program. Works Great! thanks

Bcheck555, please try these and let me know if you run into any issues. If all goes well, I'll move them to the first post.

Crippsdr, I'm glad you like it.

Perfect, thank you sir!

Hi NSFW.

I have tried to copy my timing tables from Ecuflash , adding '[Table3D]' in the Left top cell into exel then copy and past into app..Gives me error. Can you do this or must i do it from RR...Is there a max number of columns and rows..?

Error below.
************** Exception Text **************
System.ArgumentOutOfRangeException: Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index
at System.ThrowHelper.ThrowArgumentOutOfRangeException(ExceptionArgument argument, ExceptionResource resource)
at System.ThrowHelper.ThrowArgumentOutOfRangeException()
at System.Collections.Generic.List`1.get_Item(Int32 index)
at NSFW.TimingEditor.Util.LoadTable(String tableText, ITable table)
at NSFW.TimingEditor.TimingForm.pasteButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


Kind Regards

Sorry about the ugly error message...

It won't work with EcuFlash, you'll need to use RomRaider instead.

kingchett

I got the same error when I tried the timing editor too.
I had changed the copy setting in Romraider from Romaider format to Airboy's spreadsheet format.
Changing this back to the original setting fixed the problem for me.

Hope this helps.