RomRaider

2DF2C

Hi,
thx for your answear. In my 1. flash I've changed the setting to 10. I've seen values up to 70 in my logging.
Ok after 1. flash I set it to 5 and the same shi*. What is wrong?
I'vent the IDA Program, so I can't look for myself.

Greets
Marcel

Values up to 70? I'm not sure you're logging AF3 correction then... the most that you generally see on AF3 correction is 3% to -3%. a -70% correction would take an AFR of 14.7 into the 4's - that doesn't make sense at all.

Probably logging 16 bit instead of 32 bit????

AFR is 14,5. And he would go up and down. I've had an closed cat last week and I don't know why. The AF#1 correction is at idle +3,12. See attach for details. It is an log from last week.

I've logged with ecuEdit and Romraider. It is every time an -50 up to -70.

Can you post a log with AF correction #3. I know if you log the 16 bit AFC #3 it will show numbers like 50-70 etc... you need to choose the 32 bit version of the parameter to read it properly.

Older logger definitions didnt have the 16 bit / 32 bit distinction.

Wait a moment. I'ld make it with romraider.

Attach is my car mod list.

Thanks eminehart, didn't think of that.

You don't know how many people send me logs with every AFC and AFL parameter logged
I see the weird numbers like that in AFC 3 all the time.

Basically if it just says AFC 3 then its the 16 bit version. He will need the latest logger defs to see the 16bit or 32bit option.

Holy shi*, sorry.

I've make 2 logs one with ecuedit (mostly work with it) and the other is with romraider. eminehart is in right I've logged the 16 bit. I dont know why. Because I've flashed my car every time with 32 bit. And logging... Oh no what a mistake.
It is 2 miles after reflash with AF#3 set to -5% up to +5%. But it is not my effect. I woul'd remove the huge AF Correction and the AF Ratio swinging.

Greets Marcel

-5% and 5% won't do it - in all my logging, I never saw the AF3 correction go above 3%. Zero the tables, and you'll likely see the swinging stop (it's part of the cat efficiency requirements, lean/rich - there's a thread on it somewhere here).

As above. Keeping in mind that at 11:1 AFR, 3% drift is 0.5 AFR

Hi,
I've zero the table totay and flashed. There is no swinging AFR now at idle. Tomorrow I'll make an testdrive to my work. It is 32 miles. After the I would check the log. And I can make an Roughnes test. Because I don't know why my cat come closed. Maybe it is an consequence of my faulty injector in cyl 4.

Can anyone say me the adress of an A4SE800D Map?

Greets and many thanks
Marcel

If you can provide a rom, I'll look for it.

PM is send. Many thanks to you.