How to log data to micro SD card

Wrick · **Joined:** Sun Jul 12, 2009 5:57 pm **Posts:** 130

The website we used to make the config files is MIA

http://verticaltier.net/configtool/logger.php

anyone have a solution ?

Thanks !

enthusiast · **Joined:** Sat Mar 03, 2007 9:58 pm **Posts:** 98

It is back up. This will be the second time it has gone down due to my cats. :oops:

If I have some time I will migrate it to another domain.

dschultz · **Posted:** Thu May 17, 2012 1:53 pm

Can you check what those cats have done again?

Jochen_145 · **Joined:** Wed Nov 10, 2010 11:56 am **Posts:** 418

bwt.:

does this webside corrosponding to actual expirimental RR logger deffinitions ?

I missing the Diesel ECU, with are allready log-able..
Because of the EURO5 ones only been log by stand-alone logger jet, this will be a big help for every EURO5 Diesel fellow

BR

dschultz · **Posted:** Fri May 18, 2012 1:56 pm

Yes the logger parameters are fairly new, but the cross reference from the CAL ID to the logger parameters is what's missing as that is accomplished using the RomRaider ECU def file, I believe, which does not contain any new CAL IDs since it was last update in 2009.

Wrick · **Joined:** Sun Jul 12, 2009 5:57 pm **Posts:** 130

cats again ?

Wrick · **Joined:** Sun Jul 12, 2009 5:57 pm **Posts:** 130

Because of your perfect website, I now completely rely on you.

When it breaks down, I'm totally useless.

I get this today :

Code:

Forbidden

You don't have permission to access /configtool/logger.php on this server.

I can access the site, but when I add the ECU ID and click GET PARAMS, I get the above error.

I don't think it's the cat's fault this time though

enthusiast · **Joined:** Sat Mar 03, 2007 9:58 pm **Posts:** 98

Fixed. I applied a web server firewall as I was getting some a-holes trying to hack my box.

I have changed some of the rules to make the logger work again.

dan0 · **Joined:** Thu Jan 03, 2013 2:11 am **Posts:** 12

So I've got my car setup to log to sd card no problem. What's happening now is that when I include certain parameters, the logging fails. Doesn't log anything.
I'm using an OpenPort 2.0 on a 2013 WRX. The main offending fields are Requested Torque and Target Boost (either 2 or 4 byte). I have tried different number of fields and I've logged as many as 10 if I remember correctly, but if I include any of the above mentioned, the OP doesn't log anything.
Rather than deleting the params from the logcfg.txt I just commented them out and it logs fine obviously.

Here is the script part from logcfg

;E56 - Requested Torque*(raw ecu value)
;paramname = Requested_Torque*(raw ecu value)
;paramid = 0xFF8554
;isfloat = 1
;scalingrpn = x

;E90 - Target Boost (2-byte)**(psi absolute)
;paramname = Target_Boost_(2-byte)**(psi absolute)
;paramid = 0xFF6868
;databits = 16
;scalingrpn = x,0.01933677,*

Here's one that works

;P58 - A/F Sensor #1(Lambda)
paramname = A/F_Sensor_#1(Lambda)
paramid = 0x000046
scalingrpn = x,128,/

Any help would be greatly appreciated

dschultz · **Posted:** Thu Jan 10, 2013 4:14 am

Unless you have the EcuFlash Extended RAM parameter patch applied to the ROM and flashed to the car, it will not read anything but standard parameters.

Also, for people who wish to convert a RomRaider logging profile.xml to Openport 2.0 Standalone format: viewtopic.php?t=9136

dan0 · **Joined:** Thu Jan 03, 2013 2:11 am **Posts:** 12

Where could I get that patch? It's nowhere in the tactrix site and the internet just points me back to this post

dschultz · **Posted:** Tue Jan 15, 2013 6:55 pm

It's in the EcuFlash application. You open your ROM with EcuDlash and select the patch from the list (at bottom if it appears). Save the ROM and flash it to the car.

dan0 · **Joined:** Thu Jan 03, 2013 2:11 am **Posts:** 12

Oh got it. Sorry if that is a silly question, I'm at work right now so I don't have it all in front of me. Thanks for getting back to me though!

MFB · **Posted:** Wed Jan 16, 2013 10:10 pm

What triggers the time Stamp to activate in can logging? I see some of my logs with the correct date and time while others the standard date time year 2009.

dan0 · **Joined:** Thu Jan 03, 2013 2:11 am **Posts:** 12

I noticed the same thing, but I just learned to live with it. I dump the logs on my computer and make the notes there

RomRaider

Forum rules

How to log data to micro SD card

Who is online