Jeramie wrote:
ev8siv3 wrote:
I put my downpipe in this weekend and the o2 sensor got stuck in the old DP ... eventually I used brute strength and it ripped the whole sensor out including the portion the threads are in... So I just zip-tied the sensor under the car and plugged the o2 hole.. changed my CEL codes and I have no CEL.
LOL! Things never go as they should

Do you know what the numbers represent?
I took the normal values, then went in to HEX and modified the same areas with the defeat codes. After that I verified what the new values were, reset the numbers with the stock and then did it all again to verify that the hex would be correct both ways. Works great.