Learning View v1.0 RC3

Patrick P931 · **Posted:** Mon Dec 24, 2012 6:47 pm

merchgod, I just wanted to say thanks for lv!

throttlehappy · **Posted:** Tue Dec 25, 2012 1:13 am

merchgod wrote:

Thanks for the input guys, but I am set on keeping this closed source for now. It will always be free, though.

I like this as well, having control of a project and allowing the self implementation of additional ROM's is great.

Will we be able to see existing defined LV definitions to assist with new ROM's? For example, A2WC420H is publicly undefined ROM with no LV support yet inherits most tables from A2WC420M so knowing the existing address would help with unknown ROM. I also find say common ECU ID's have similar addresses so is it possible to inherit? Say AZ1G900O inheriting from AZ1G900P?

merchgod · **Joined:** Thu Mar 30, 2006 2:38 am **Posts:** 5336

throttlehappy wrote:

merchgod wrote:

Thanks for the input guys, but I am set on keeping this closed source for now. It will always be free, though.

I like this as well, having control of a project and allowing the self implementation of additional ROM's is great.

Will we be able to see existing defined LV definitions to assist with new ROM's? For example, A2WC420H is publicly undefined ROM with no LV support yet inherits most tables from A2WC420M so knowing the existing address would help with unknown ROM. I also find say common ECU ID's have similar addresses so is it possible to inherit? Say AZ1G900O inheriting from AZ1G900P?

My plan is to allow you to inherit from existing LV definitions, but those internal definitions (i.e. offsets) will not be exposed. The user-defined xml will therefore be optional (i.e. LV will run without it based on the internal definitions). Finding the offsets and other data needed for LV will be very easy for someone who is familiar with reversing Subaru ECUs. A motivated beginner to reversing could also probably figure it out fairly easily (almost all the defined items needed for LV are defined in some way in RomRaider's ECU or logger defs). For the necessary value to the DTC reader, which may not be widely known, I will explain how to find and define it.

dschultz · **Posted:** Thu Dec 27, 2012 7:38 pm

Update suggestions...

be J2534 compliant and use any driver loaded on the user's system as defined in the Registry, not just OP2 (Tactrix, DrewTech, Intrepid CS, etc)
Develop against Mono so non-Windows platforms can take advantage of LV

NemesisWRX · **Posted:** Wed Jan 09, 2013 4:06 am

Hi, first I would like to say that I LOVE Learning View. It has helped me fine tune my maps for years to keep knock low. I am currently having an issue however and I was wondering if anyone could help out. It seems that the top set of values is blacked out for me. The biggest problem with this is that I can no longer read the IAM using LV. I have attached a screenshot of the problem. I have tried to re-download LV and the issue persists. FYI I am running a Gateway netbook on XP. I wasnt having this issue on my win7 laptop, but I like to keep the netbook in the car and this issue is keeping me from using LV to its potential.

Has anyone run across this?

Thanks!

Turbopit · **Posted:** Wed Feb 06, 2013 2:28 am

Mainly just here to say thanks! I've had a tactrix cable since Jan of 2007 but forgot about it and had other cars than my 2006 WRX to play with. Now, after 170,000 miles I'm getting a cel so I dug out the cable and found Learning View.

Code:

CAL ID:A8DH201X
Description: 06 USDM Impreza WRX MT
ECU ID:4312584106

IAM    0.3125

ATM. PRESSURE    12.04 psi
IAT    134.6 F
ECT    185.0 F
A/F LRN #3    N/A

A/F Learning #1:
0 - <5.60    5.60 - <10.00    10.00 - <40.00    40.00+
3.59         -9.00            -6.00             -6.00 

FLKC Table        0 - <1.10    1.10 - <1.55    1.55 - <1.90    1.90 - <5.00    5.00+
0 - <2400         1.60         3.03            0.00            0.00            0.00 
2400 - <3600      0.42         3.22            0.00            0.00            0.00 
3600 - <4800      1.50         0.35            0.00            0.00            0.00 
4800 - <5600      0.00         0.00            0.00            0.00            0.00 
5600 - <11000     0.00         0.00            0.00            0.00            0.00 
11000 - <12000    0.00         0.00            0.00            0.00            0.00 
12000+            0.00         0.00            0.00            0.00            0.00 

Diagnostic Trouble Code(s):
DTC MEMORIZED: P0302 MISFIRE CYLINDER 2
DTC MEMORIZED: P0000 PASS CODE (MISFIRE DETECTED)

hebs · **Joined:** Tue Nov 21, 2006 9:31 am **Posts:** 337

Any update on support for 2012 usdm wrx?

wrxt4cy · **Posted:** Mon Feb 11, 2013 8:50 pm

Every time I get an email notice about this this thread being updated, I get excited that there might be the new LV available and then I become sad to find out its not. :cry:

hebs · **Joined:** Tue Nov 21, 2006 9:31 am **Posts:** 337

wrxt4cy wrote:

Every time I get an email notice about this this thread being updated, I get excited that there might be the new LV available and then I become sad to find out its not. :cry:

Same

Sorry to give everyone blue balls.

bmcrally · **Joined:** Fri Jul 06, 2012 1:36 am **Posts:** 9

Sorry to be getting people excited with activity.

I have an '09 ADM Liberty 2.5i 5MT
Should this ECU be supported by current LV and if not, how can I read the DTCs ?
It is throwing a CEL and LV is giving me no info at all.

LV 1.0RC3 says it can't read the ROM.

ECU ID shows as 62521A4007, no CAL ID shown.

And yes I have experience using LV, it works perfectly well on my 06 ADM WRX

Thanks
Brett

ckibue · **Posted:** Tue Feb 12, 2013 2:16 pm

NemesisWRX wrote:

Hi, first I would like to say that I LOVE Learning View. It has helped me fine tune my maps for years to keep knock low. I am currently having an issue however and I was wondering if anyone could help out. It seems that the top set of values is blacked out for me. The biggest problem with this is that I can no longer read the IAM using LV. I have attached a screenshot of the problem. I have tried to re-download LV and the issue persists. FYI I am running a Gateway netbook on XP. I wasnt having this issue on my win7 laptop, but I like to keep the netbook in the car and this issue is keeping me from using LV to its potential.

Has anyone run across this?

Thanks!

Try change the Netbook Windows XP theme, I have noticed some Windows themes blacken out the top values to the point of being unreadable.

throttlehappy · **Posted:** Sat Feb 16, 2013 11:41 am

bmcrally wrote:

Sorry to be getting people excited with activity.

I have an '09 ADM Liberty 2.5i 5MT
Should this ECU be supported by current LV and if not, how can I read the DTCs ?
It is throwing a CEL and LV is giving me no info at all.

LV 1.0RC3 says it can't read the ROM.

ECU ID shows as 62521A4007, no CAL ID shown.

And yes I have experience using LV, it works perfectly well on my 06 ADM WRX

Thanks
Brett

E2SB002M

Shoot me a PM, I have a definition for the CEL's so you can turn off the air pump

I know exactly what it is, hence why I have the DTC's defined

marpen · **Joined:** Fri Dec 30, 2011 4:10 pm **Posts:** 16

hello guys how do you get to 0 values in the red A/F learning ?

guitarman19853 · **Joined:** Fri Mar 01, 2013 3:27 pm **Posts:** 4

I'm getting a message saying my ECU isn't supported.

Cal ID: AE5K500L
ECU ID: 8112585007

It's a 2012 WRX, is there still no support for it in LearningView?

hebs · **Joined:** Tue Nov 21, 2006 9:31 am **Posts:** 337

guitarman19853 wrote:

I'm getting a message saying my ECU isn't supported.

Cal ID: AE5K500L
ECU ID: 8112585007

It's a 2012 WRX, is there still no support for it in LearningView?

nope...

RomRaider

Forum rules

Learning View v1.0 RC3

Who is online