how to change the voltage of the fuel pump?

FeelstiWRX · **Posted:** Thu Apr 04, 2013 1:20 pm

how to change the voltage of the pump in the ROM Subaru Impreza WRX jdm?
how to find the address in the rum to add this address to the file extension?
I need to change the voltage to the fuel pump

td-d · **Posted:** Thu Apr 04, 2013 2:44 pm

You mean fuel pump duty? You can change the % duty cycle at low and medium loads.

What's your CAL id?

FeelstiWRX · **Posted:** Fri Apr 05, 2013 6:25 am

td-d wrote:

You mean fuel pump duty? You can change the % duty cycle at low and medium loads.

What's your CAL id?

i cant find where is that parametr in romraider

my ECU: A4SD800A
my car: Impreza WRX 2000- JDM (250hp)

td-d · **Posted:** Fri Apr 05, 2013 9:08 am

Insert this into your Ecuflash definition (A4SD800A.xml). Make sure you have the latest 16bitbase.xml installed.

Code:

   <table name="Fuel Pump Duty (Idle)" address="1c797">
   </table>

   <table name="Fuel Pump Duty (Cruise)" address="1c785">
   </table>

FeelstiWRX · **Posted:** Fri Apr 05, 2013 12:31 pm

td-d wrote:

Insert this into your Ecuflash definition (A4SD800A.xml). Make sure you have the latest 16bitbase.xml installed.

Code:

   <table name="Fuel Pump Duty (Idle)" address="1c797">
   </table>

   <table name="Fuel Pump Duty (Cruise)" address="1c785">
   </table>

how to install 16bitbase.xml ????

td-d · **Posted:** Fri Apr 05, 2013 1:52 pm

Just make sure that you have these lines in there already, or insert them into 16bitbase.xml. You will find this file under the Ecuflash directory rommetadata/Subaru/bases

Code:

   <table name="Fuel Pump Duty (Idle)" category="Test" type="2D" level="2" scaling="Duty Cycle">
      <description>This will set the desired Cruise FP duty during Idle conditions.</description>
      <table name="Idle Duty" type="Static Y Axis" elements="1">
         <data>Fuel Pump Duty During Idle Conditions</data>
      </table>
   </table>

   <table name="Fuel Pump Duty (Cruise)" category="Test" type="2D" level="2" scaling="Duty Cycle">
      <description>This will set the desired Cruise FP duty during cruising conditions.</description>
      <table name="Cruise Duty" type="Static Y Axis" elements="1">
         <data>Fuel Pump Duty During Cruise Conditions</data>
      </table>

FeelstiWRX · **Posted:** Fri Apr 05, 2013 2:14 pm

td-d wrote:

Just make sure that you have these lines in there already, or insert them into 16bitbase.xml. You will find this file under the Ecuflash directory rommetadata/Subaru/bases

Code:

   <table name="Fuel Pump Duty (Idle)" category="Test" type="2D" level="2" scaling="Duty Cycle">
      <description>This will set the desired Cruise FP duty during Idle conditions.</description>
      <table name="Idle Duty" type="Static Y Axis" elements="1">
         <data>Fuel Pump Duty During Idle Conditions</data>
      </table>
   </table>

   <table name="Fuel Pump Duty (Cruise)" category="Test" type="2D" level="2" scaling="Duty Cycle">
      <description>This will set the desired Cruise FP duty during cruising conditions.</description>
      <table name="Cruise Duty" type="Static Y Axis" elements="1">
         <data>Fuel Pump Duty During Cruise Conditions</data>
      </table>

AAAAAAA
you mean it is in EcuFlash?....
f***k i try insert that code into romraider definition file...

td-d · **Posted:** Fri Apr 05, 2013 2:59 pm

td-d wrote:

Insert this into your Ecuflash definition (A4SD800A.xml).

FeelstiWRX · **Posted:** Fri Apr 05, 2013 3:27 pm

nothing to do...
i do that you post, in ecuflash i see new category but cant change that (user level is DEVELOPER

FeelstiWRX · **Posted:** Fri Apr 05, 2013 3:51 pm

heeelp(((

RomRaider

Forum rules

how to change the voltage of the fuel pump?

Who is online