Learning View v1.0 RC3

Th3Franz · **Joined:** Tue Jun 02, 2009 10:20 pm **Posts:** 52

Will you please add the following ECU ID?
521A355007 For an 08 3.0R - AT

ukwrx · **Joined:** Mon Sep 19, 2011 4:39 pm **Posts:** 87

Any way to get learning view save the files in the working folder rather than the folder the .exe is in?

I launch it from a shortcut with the start in folder set but it still stores data in the folder where the exe is.

TGM2 · **Joined:** Wed Jul 10, 2013 4:57 am **Posts:** 11

Hello,

I'm new to all this but I've read through the entire post and the only thing I can see to try is to move the Learning View Folder to the desktop. I will do that when I get my car back later. In summary:

I then tried v0.6 and got the ”ECU not currently supported” error.

Have I not seen a fix, being a noob muppet?

Many thanks,
Scott

hebs · **Joined:** Tue Nov 21, 2006 5:31 am **Posts:** 337

merchgod wrote:

Hi all,

Sorry for the lack of updates. I have put some work into the user definitions functionality for LV (and bug fixes), but still have a lot left to finished and there hasn't been a lot of time as of late to work on it. No ETA at this time, but I'm going to try to work as I can. Thank you for your patience.

Bill

Any updates bill?

hebs · **Joined:** Tue Nov 21, 2006 5:31 am **Posts:** 337

ukwrx wrote:

Any way to get learning view save the files in the working folder rather than the folder the .exe is in?

I launch it from a shortcut with the start in folder set but it still stores data in the folder where the exe is.

Why not just move the exe to the folder you want to store the files, and then put the shortcut where you want to launch it from?

Merp · **Joined:** Thu Jul 23, 2009 1:46 pm **Posts:** 863

hebs wrote:

merchgod wrote:

Hi all,

Sorry for the lack of updates. I have put some work into the user definitions functionality for LV (and bug fixes), but still have a lot left to finished and there hasn't been a lot of time as of late to work on it. No ETA at this time, but I'm going to try to work as I can. Thank you for your patience.

Bill

Any updates bill?

BOOO closed source abandonware! Hooray Dale! viewtopic.php?f=14&t=9745 :mrgreen:

hebs · **Joined:** Tue Nov 21, 2006 5:31 am **Posts:** 337

Merp wrote:

hebs wrote:

merchgod wrote:

Hi all,

Sorry for the lack of updates. I have put some work into the user definitions functionality for LV (and bug fixes), but still have a lot left to finished and there hasn't been a lot of time as of late to work on it. No ETA at this time, but I'm going to try to work as I can. Thank you for your patience.

Bill

Any updates bill?

BOOO closed source abandonware! Hooray Dale! viewtopic.php?f=14&t=9745 :mrgreen:

<3

dschultz · **Posted:** Sat Jul 20, 2013 1:34 pm

TGM2 wrote:

Hello,

I'm new to all this but I've read through the entire post and the only thing I can see to try is to move the Learning View Folder to the desktop. I will do that when I get my car back later. In summary:

I then tried v0.6 and got the ”ECU not currently supported” error.

Have I not seen a fix, being a noob muppet?

Many thanks,
Scott

For whatever reason your ECU failed to respond to the command to retrieve the FLKC load values. This is a command that settings a start address and asks the ECU to send back X number of bytes from the start address. Yours did not respond which is odd.
Try this:

open the RomRaider EcuEditor
under the SSM menu Launch Test App
with the command set to Init press Send, you should get a ECU init sequence of bytes. If not the ECU did not respond (figure out why and fix until this step is successful)
set command to Read
set Address to 0CDF68 (the first digit is a zero)
set Read length to 16
press Send command

Can you provide the response from the Trace window? (Ctrl-a to select all, Ctrl-c to copy the response)

nicgsxr · **Joined:** Tue Jul 23, 2013 9:12 pm **Posts:** 2

can you add ECU ID : 8A12784007, STI 2013 SEDAN CANADIAN

merchgod · **Joined:** Wed Mar 29, 2006 10:38 pm **Posts:** 5336

Hi all,

I have not made much progress on updating LV - just never seems like there's enough time. I may just have to set aside small chunk of time per day (even if it is only 10 minutes) and just get it done that way. One way or another I will at least have this final release finished at some point. It is good to see that similar functionality has been added to RomRaider. It may be that most users end up going with that, but, regardless, I will at least finish the last round of changes for LV since I promised to do so.

Bill

TGM2 · **Joined:** Wed Jul 10, 2013 4:57 am **Posts:** 11

dschultz wrote:

For whatever reason your ECU failed to respond to the command to retrieve the FLKC load values. This is a command that settings a start address and asks the ECU to send back X number of bytes from the start address. Yours did not respond which is odd.
Try this:

open the RomRaider EcuEditor
under the SSM menu Launch Test App
with the command set to Init press Send, you should get a ECU init sequence of bytes. If not the ECU did not respond (figure out why and fix until this step is successful)
set command to Read
set Address to 0CDF68 (the first digit is a zero)
set Read length to 16
press Send command

Can you provide the response from the Trace window? (Ctrl-a to select all, Ctrl-c to copy the response)

Hello,

Please forgive the tardy response: holiday, kids and painting the house to pacify the wife, have kept me otherwise occupied

Please find below the output as requested:
SND [Read]: 8010F006A0000CDF680F88
RCV [Read]: 80F01011E03FA666663FD1EB854000000040A00000C2
DATA [Raw]: 3FA666663FD1EB854000000040A00000

Many thanks,
Scott

dschultz · **Posted:** Sun Aug 25, 2013 8:19 am

TGM2 wrote:

Please find below the output as requested:
SND [Read]: 8010F006A0000CDF680F88
RCV [Read]: 80F01011E03FA666663FD1EB854000000040A00000C2
DATA [Raw]: 3FA666663FD1EB854000000040A00000

Well it didn't have a problem reading that time.
The result is 1.3, 1.64, 2.0, 5.0

The latest RomRaider also has Learning Tables View now. You could try it if you continue to have trouble.

merchgod · **Joined:** Wed Mar 29, 2006 10:38 pm **Posts:** 5336

TGM2 wrote:

Hello,

Please forgive the tardy response: holiday, kids and painting the house to pacify the wife, have kept me otherwise occupied

Please find below the output as requested:
SND [Read]: 8010F006A0000CDF680F88
RCV [Read]: 80F01011E03FA666663FD1EB854000000040A00000C2
DATA [Raw]: 3FA666663FD1EB854000000040A00000

Many thanks,
Scott

Hi Scott. In the two previous Learning View logs you posted (one from version 0.6 and one from version 1.0), it fails to get a response from the ECU for the IAM in one and FLKC load axis in the other. So it appears that it is an intermittent comms issue. I would download the latest version of Ecuflash and re-install (also update the Openport 2.0 firmware via Ecuflash if a new one is available) and then give it a go in Learning View again. If you still have problems, post up the logs and also try logging in RomRaider with the Openport 2.0 for an extended period of time (say for a 10 minute drive) and see if the same thing happens.

TGM2 · **Joined:** Wed Jul 10, 2013 4:57 am **Posts:** 11

Well after much un-installing and re-installing of software and drivers I finally found the reason. The USB ports on the left side of my laptop are 3.0 and that was what I have been using as that side is nearest the OBD-II socket. When, for some reason, I used the right side (which only has USB 2.0) it worked!

Cheers for all your help. All the best,
Scott

naviuk · **Posted:** Thu Dec 19, 2013 3:01 am

Hey

I started using the romraider version of learning view etc last night, impressive, i still prefer the old versions but it has solved a few unsupported ecu issues i had.

thanks for a awesome product!!

RomRaider

Forum rules

Learning View v1.0 RC3

Who is online