|
RomRaider
Documentation
Community
Developers
|
| Author |
Message |
|
idipskoalmint
|
Post subject: Re: SPREADSHEET: import and graph log files  Posted: Wed May 22, 2013 1:26 pm |
|
 |
| Newbie |
Joined: Sun Jan 18, 2009 2:15 pm
Posts: 4
|
Airboy wrote: Looks like MS has changed VBA in the newer versions of Excel. I don't have access to any machines running Excel 2013 so can't really do anything on this end. Is there a "compatibility" mode that you can open the spreadsheet in? No problem. I have a copy of 2010 I can install this afternoon after work. Thanks for looking at least.
|
|
| Top |
|
 |
|
ukwrx
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Wed Jun 05, 2013 3:39 pm |
|
|
| Newbie |
Joined: Mon Sep 19, 2011 4:39 pm
Posts: 87
|
|
How do people copy tables from romraider into airboys spreadsheet?
[update] I worked it out, you are supposed to paste into a blank part and use the move/align tables button, not paste directly into the position the instructions on the page say.
When I copy table from the edit menu and paste into the top left cell in the spreadsheet the datacells dont match. because the [Table3D] ends up on a separate line and the x values are shifted left. here is a paste from the rom. I'm using office 2007 incase that makes a difference.
[Table3D]
0.00 7.14 14.29 21.43 28.57 35.71 42.86 50.00 57.14 64.29 71.43 78.57 85.71 92.86 100.00
800 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
1200 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
1600 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
2000 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
2400 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
2800 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
3200 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
3600 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
4000 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
4400 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
4800 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
5200 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
5600 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
6000 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
6400 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
6450 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 182.9 205.7 228.6 251.4 274.3 297.1 320.0
6500 0.0 22.9 45.7 68.6 91.4 114.3 137.1 160.0 180.0 200.0 220.0 220.0 220.0 220.0 220.0
|
|
| Top |
|
|
|
LittleBlueGT
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Fri Jul 19, 2013 9:28 pm |
|
|
| Experienced |
 |
Joined: Mon Apr 30, 2007 8:02 pm
Posts: 521
|
|
I have a 2013 STI, and I have this table, which seems different then what you currently have set-up in your DBW graphs on the log-file-inter sheet.
Any chance it is being modded in the future, or am I missing something?
| Attachments: |
TargetThrottleAnglesaccel.png [ 421.15 KiB | Viewed 8540 times ]
|
_________________
05 LGT (ST and OS tuning) AVO380/TMIC/header/TBE/alky/AEM CAI
|
|
| Top |
|
|
|
Airboy
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Sat Jul 20, 2013 1:03 am |
|
|
| RomRaider Donator |
Joined: Wed Aug 02, 2006 9:40 pm
Posts: 1067
Location: Calgary
|
LittleBlueGT wrote: I have a 2013 STI, and I have this table, which seems different then what you currently have set-up in your DBW graphs on the log-file-inter sheet. Any chance it is being modded in the future, or am I missing something? Attachment:
TargetThrottleAnglesaccel.png [ 421.15 KiB | Viewed 8540 times ]
2013, eh? Didn't go with R35 GT-R? The throttle page works with the "new" tables that uses Requested Torque Base (2D table with RPM axis). Should look something like this:
| Attachments: |
2013 STI throttle.gif [ 143.89 KiB | Viewed 9425 times ]
|
|
|
| Top |
|
|
|
LittleBlueGT
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Sat Jul 20, 2013 9:26 pm |
|
|
| Experienced |
|
Joined: Mon Apr 30, 2007 8:02 pm
Posts: 521
|
|
Got it to work just fine, thanks a lot for that. (confused by the original data in there, and possibly by the naming differences OS to ATR)
GTR was just too big of a car for me, and too rough. STI already has taken up $70,000 of my money, and only 1100 kms on her, so it is not like it saved me much over a used GTR.
_________________
05 LGT (ST and OS tuning) AVO380/TMIC/header/TBE/alky/AEM CAI
|
|
| Top |
|
|
|
SkyRipper
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Tue Aug 06, 2013 7:28 am |
|
|
| Newbie |
Joined: Thu Jan 20, 2011 4:11 pm
Posts: 35
Location: Taiwan
|
|
dear airboy... in the road dyno sheet, how do I extend the rpm range to 8000 or even 9000?
7000rpm limit is not enough for brz and ft86... thanks!
|
|
| Top |
|
|
|
Airboy
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Fri Aug 09, 2013 1:07 am |
|
|
| RomRaider Donator |
Joined: Wed Aug 02, 2006 9:40 pm
Posts: 1067
Location: Calgary
|
|
Double click on the RPM axis on the chart and change the Range settings.
|
|
| Top |
|
|
|
2bfi
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Wed Oct 08, 2014 11:43 am |
|
|
| RomRaider Donator |
Joined: Fri Dec 25, 2009 8:46 am
Posts: 93
|
|
Thanks for this great tool. I've been using it for a couple of years and has made life easier.
Does the AFR interpolate take into account STFT and LTFT? It doesn't seem to be part of the parameters used to compute for the AFR error %. Am I missing something?
|
|
| Top |
|
|
|
Airboy
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Sun Oct 12, 2014 9:04 pm |
|
|
| RomRaider Donator |
Joined: Wed Aug 02, 2006 9:40 pm
Posts: 1067
Location: Calgary
|
2bfi wrote: Thanks for this great tool. I've been using it for a couple of years and has made life easier.
Does the AFR interpolate take into account STFT and LTFT? It doesn't seem to be part of the parameters used to compute for the AFR error %. Am I missing something? No, it doesn't include fuel trims.
|
|
| Top |
|
|
|
Lassiv
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Thu Mar 05, 2015 11:14 am |
|
|
| Newbie |
Joined: Wed Mar 04, 2015 4:13 pm
Posts: 7
|
|
Looks very nice program. But i dont have Office and try to use that with OpenOffice program, but not worked. Anyone try to use this without Office Exel?
|
|
| Top |
|
|
|
craighoog
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Sat Mar 07, 2015 5:36 pm |
|
|
| Newbie |
Joined: Thu Feb 12, 2015 2:23 pm
Posts: 10
Location: London, Ontario, Canada
|
Lassiv wrote: Looks very nice program. But i dont have Office and try to use that with OpenOffice program, but not worked. Anyone try to use this without Office Exel? I haven't tried it since it runs on VBA macros, etc. OpenOffice support for VBA is limited at best in my experience.
|
|
| Top |
|
|
|
Lassiv
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Sun Mar 08, 2015 5:19 am |
|
|
| Newbie |
Joined: Wed Mar 04, 2015 4:13 pm
Posts: 7
|
|
| Top |
|
|
|
dschultz
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Sun Mar 08, 2015 9:20 am |
|
|
| RomRaider Developer |
Joined: Wed May 20, 2009 9:49 pm
Posts: 7314
Location: Canada eh!
|
|
| Top |
|
|
|
Airboy
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Mon Mar 16, 2015 12:41 am |
|
|
| RomRaider Donator |
Joined: Wed Aug 02, 2006 9:40 pm
Posts: 1067
Location: Calgary
|
Lassiv wrote: I tryed to my friend Office Excel 2010 and not work with that. Any info / tutorial how that excel use, i only import that RR csv file to program and thats not work. I attached that csv file and screenshot that excel view this message. Hope someone can help, if that not work i dont get that office 2010  The regional settings is part of the problem. The numbers in the log files doesn't use "." for the decimal point and the separator is not ",' so the macros can't parse the file properly.
|
|
| Top |
|
|
|
Lubasu
|
Post subject: Re: SPREADSHEET: import and graph log files Posted: Mon Aug 31, 2015 11:56 am |
|
|
| Newbie |
Joined: Sat Nov 02, 2013 2:31 pm
Posts: 6
|
|
Has anyone had any success getting the macros to work in Excel 2013?
_________________
2005 Saab 9-2x Aero Catless Uppipe Downpipe, 3.5 inch exhaust, walbro 255, XPT Stage 2
|
|
| Top |
|
|
Who is online |
Users browsing this forum: No registered users and 2 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
