Idle Stability / Airflow Tables

td-d · **Posted:** Tue Oct 15, 2013 12:18 pm

Yeah, take the B table out, crept in there mistakenly (that's why no axis).

dux10 · **Joined:** Tue Jun 05, 2012 7:37 pm **Posts:** 81

td-d wrote:

Looks like the older models don't have the base minimum related tables and params - only this:

Code:

ROM:00085220 Table_Target_Throttle_Angle_Idle_Airflow:.data.w h'11 ; DATA XREF: sub_3ED94+4o
ROM:00085220                                         ; ROM:off_3EEA4o
ROM:00085222                 .data.w 0
ROM:00085224                 .data.l flt_CBAC4
ROM:00085228                 .data.l flt_CBB08

My 05 LGT ROM A2WC510C actually has two of the base min tables. Also there are 2 decel adders with 16 values each. No 2 value 'decel adder b' exists. Its interesting how this one looks a little different in implementation.

Th3Franz · **Joined:** Wed Jun 03, 2009 2:20 am **Posts:** 52

I started looking at the idle stability tables. I know the number of elements need to be changed, but does this look defined right for a stock ROM?
I double checked the addresses..

dux10 · **Joined:** Tue Jun 05, 2012 7:37 pm **Posts:** 81

Th3Franz wrote:

I started looking at the idle stability tables. I know the number of elements need to be changed, but does this look defined right for a stock ROM?
I double checked the addresses..

Doesn't look right.

letsteyr · **Joined:** Wed Jan 31, 2007 12:13 pm **Posts:** 39

Did one of you analyse how works idle stability based on ignition timing?
I've seen that when the engine stalls, the ecm increases idle valve and also Intake AVCS.

04ssti · **Joined:** Sat Dec 25, 2010 10:16 pm **Posts:** 71

Hey guys, I have just 1 idle speed stability table. Can you help me getting the rest for my merp mod patched A2ZJ710J rom?

Thanks

td-d · **Posted:** Sat Jan 18, 2014 2:29 pm

One is fine - A and B tables are only MT and AT.

04ssti · **Joined:** Sat Dec 25, 2010 10:16 pm **Posts:** 71

Is there any tables that would help when putting the car in gear. I can set overrun to 2k rpm and if I were rolling at like 2mph I'll put it in gear and it starts loosing control of idle. Drops really low. It's fine if I come to a complete stop for a few seconds before putting it in gear.

I have been messing with the idle stability table and the definition of the x and y axis is making very confused so I started changing a bunch. So it catches itself while coasting and putting it into gear. But if I am moving and put it in gear the idles drop. So I just added 5% throttle plate in DBW and it fixed it.

04ssti · **Joined:** Sat Dec 25, 2010 10:16 pm **Posts:** 71

Or timing/decel tables. Anything I can work with will help

I have changed both ends of the one 1 idle stability table I have to high + and - values and cant figure out how to get it to stop dropping idle when I go into gear while rolling.

If I am not moving, all is good..

04ssti · **Joined:** Sat Dec 25, 2010 10:16 pm **Posts:** 71

Can anyone help me with logger definitions for a2zj710j.
Also, I know it is ok I only have 1 idle stability table, but also, that table is only like 5x11 so it is much smaller than the screenshots others have posted. Any reason to this? I have tried to change the table size in the definition but that messes it all up.

Thanks

norbs · **Joined:** Sat Feb 03, 2007 11:38 pm **Posts:** 75

Could I get defs for A2WD010T.

Cheers.

td-d · **Posted:** Fri Mar 14, 2014 2:27 pm

norbs wrote:

Could I get defs for A2WD010T.

Cheers.

Don't think it's implemented in this rom - cannot find them.

norbs · **Joined:** Sat Feb 03, 2007 11:38 pm **Posts:** 75

td-d wrote:

norbs wrote:

Could I get defs for A2WD010T.

Cheers.

Don't think it's implemented in this rom - cannot find them.

Thanks!

itp · **Joined:** Mon May 15, 2006 4:02 am **Posts:** 39

How about for A8DH200X? I could really use the Idle Airflow Table and Idle Airflow Target Min in particular. Stability Table would be nice as well. But I'm not greedy. Haha.

Thanks

itp · **Joined:** Mon May 15, 2006 4:02 am **Posts:** 39

No love for the A8DH200X? TD-D? Anyone? cams+no airlow adjustment = sad car.

RomRaider

Idle Stability / Airflow Tables

Who is online