EJ 207 (2001-2005) EDM STI, stage 2. New thread title. ;)

daverst · **Joined:** Mon Oct 10, 2011 5:46 pm **Posts:** 188

Patrick P931 wrote:

daverst wrote:

I've been playing with lean spooling for the last 2 week and improved it by 300 rpm, in top gear I was hitting 19psi by 2950 and had to adjust fuelling at 2800rpm 2.50 load because it was never setup to spool so soon.

I hope to post some logs and a map with a lean spool fuelling table in a month or so when I've finish testing.

Patrick can you till me the reason for the higher A/F learning range of 120? Is it to prevent learning from adjusting WOT fuelling?

I look forward to seeing what you did to the spool, please share logs too. What gear are you logging in?

The answer to your question is yes.

Ok been away from this playing with carberry.
It's hard to compare gears because I'm running a 5mt this may be why it was spooling before the fuel came on at low rpm (2800rpm 2.50 load in 5th), but I can't see that a little bit of a higher ratio in 5th could make that much difference maybe I'm wrong.
I'm in the middle of fitting Methonal injection at the moment to this map so snowed under in the little time I get to work on the car.
As soon as I can I'll do a few logs because I need some good before and after Meth kit logs.

Gizmo20VT · **Posted:** Fri Aug 21, 2015 12:30 pm

What a great post with excellent revisions, well done to all involved.

I have a ADM 03 STI which I have had for a month now, planing to remove the Unichip piggyback system and see if I can use this as a base and learn going forward.

Romraider FTW :mrgreen:

donsterza · **Joined:** Wed Nov 12, 2014 11:03 am **Posts:** 54

Has anyone converted this to carberry?

donsterza · **Joined:** Wed Nov 12, 2014 11:03 am **Posts:** 54

I converted this rom to carberry, I left out some tables though.
I would appreciate it if someone could have a look at what Iv done and maybe help me out in some areas.

I have attached a 4th gear into 5th gear Log

lordragnar · **Joined:** Wed Mar 23, 2016 9:05 pm **Posts:** 14

Hello,

I think you did not add the two tables of advances (based timing and knock adjustment advance) before you paste the values in Carberry, who you let in "MAP based X-Axis" for ignition timing.
Look at the attached file and do not forget to use definitons "load based" for RR or ecuflash
If you want to use the MAP based ignition i dont think you can simply copy/paste the value from the original file

sorry for bad english

donsterza · **Joined:** Wed Nov 12, 2014 11:03 am **Posts:** 54

Hi Thank you for this, it seems my car's map matches the roms load quite closely, I have looked at previous logs and my MAP and load cells almost lign up but I know its not as easy as that, it was just a starting point.

i lowered the timing alot because we have bad fuel here but it doesnt look like I added the multiplier to the base. I must have coppied the wrong table out of airboys spreadsheet after I was done reducing the timing

donsterza · **Joined:** Wed Nov 12, 2014 11:03 am **Posts:** 54

The ignition timing definitely needs to be detuned see the screenshot attached but it is a good place to start.

lordragnar · **Joined:** Wed Mar 23, 2016 9:05 pm **Posts:** 14

Hi, it's good to know I will try on my car when I get back home, and I'll set my AFR problem under boost. :wink:

donsterza · **Joined:** Wed Nov 12, 2014 11:03 am **Posts:** 54

Let us know how it runs on your car bud, Im currently running lower afr timing and boost because South African fuel sucks...

lordragnar · **Joined:** Wed Mar 23, 2016 9:05 pm **Posts:** 14

Yep, this week-end if i have my new FPR, i will try and post a log :wink:

Edit : I opened a new thread for not pollute this one http://www.romraider.com/forum/viewtopic.php?f=36&t=12754 i will post logs in this thread

donsterza · **Joined:** Wed Nov 12, 2014 11:03 am **Posts:** 54

Ok great thanks Patrick, just a heads up guys this rom has adm knock sensor thresholds for factory forged pistons so you will want to use the edm settings if you'rs aren't factory forged

n00b · **Joined:** Wed Jul 13, 2016 6:08 pm **Posts:** 3

afssagdsff

donsterza · **Joined:** Wed Nov 12, 2014 11:03 am **Posts:** 54

Hi noob, what's your fuel quality like there? What mods do you have? I wouldn't flash this rom if you have no idea what you are doing, what is your level of knowledge when it comes to tuning at this stage?

ClimaxSTI · **Joined:** Tue Oct 25, 2016 9:40 am **Posts:** 3

Hi guys,
I am new in this forum. I saw your thread and it is very interessting for me, because I have a STI with 265hp (2004) and I want to change also some ECU settings. ;-)

I found the updated maps on the first page.

Which hardware changes are necessary for the file (ken lc patched r5 avcs
fix.hex)?
Which power do I have, when I use your file (app.)
I should be a starting point for me. So I will make some measurements after updating the maps.

Thank you for your help.

Marc

ClimaxSTI · **Joined:** Tue Oct 25, 2016 9:40 am **Posts:** 3

No one here to help me?

RomRaider

Forum rules

EJ 207 (2001-2005) EDM STI, stage 2. New thread title. ;)

Who is online