|
RomRaider
Documentation
Community
Developers
|
| Author |
Message |
|
sda2
|
Post subject: Re: ms43 boost control issue?  Posted: Sun Sep 24, 2017 9:22 pm |
|
 |
| Experienced |
 |
Joined: Thu Mar 10, 2016 10:59 am
Posts: 103
Location: Bielefeld, GER (English)
|
|
Check for possible error codes thrown by the ECU. The output gets disabled, when open/short circuit is detected.
The best would be putting a 7.5 - 10 watt resistor to the output and connect a portable (USB) oscilloscope to it, to see if there is an output signal at all.
_________________
..:: Wiki: MS4X.net - Discord: BMW Tuning ::..
|
|
| Top |
|
 |
|
lap79
|
Post subject: Re: ms43 boost control issue? Posted: Sun Sep 24, 2017 9:43 pm |
|
|
| Newbie |
Joined: Thu May 26, 2016 11:47 am
Posts: 17
|
|
there is an output signal, thats what I'm saying, the problem is that the output signal does not change when I change the duty cycle on the table wether its 10% or 80% duty cycle the output is the same and it always has around a 1 minute delay even when warm, and I am testing it using a 3 port solenoid
|
|
| Top |
|
|
|
hobbit382
|
Post subject: Re: ms43 boost control issue? Posted: Tue Oct 10, 2017 2:58 pm |
|
|
| Experienced |
Joined: Thu Dec 04, 2014 10:37 pm
Posts: 139
|
|
Sorry I'm late to the party, there is another table that is the "max" dc for a given cell. I'll trying adding it tonight.
|
|
| Top |
|
|
|
parisdog
|
Post subject: Re: ms43 boost control issue? Posted: Tue Oct 10, 2017 4:16 pm |
|
|
| Newbie |
Joined: Tue Aug 09, 2016 11:19 am
Posts: 19
|
hobbit382 wrote: Sorry I'm late to the party, there is another table that is the "max" dc for a given cell. I'll trying adding it tonight. it will be very helpful. thanks
|
|
| Top |
|
|
|
parisdog
|
Post subject: Re: ms43 boost control issue? Posted: Thu Oct 12, 2017 4:30 pm |
|
|
| Newbie |
Joined: Tue Aug 09, 2016 11:19 am
Posts: 19
|
|
| Top |
|
|
|
lap79
|
Post subject: Re: ms43 boost control issue? Posted: Fri Oct 20, 2017 11:29 am |
|
|
| Newbie |
Joined: Thu May 26, 2016 11:47 am
Posts: 17
|
|
ye thats the one i played around with in tuner pro, still didn't make a difference
|
|
| Top |
|
|
|
ba114
|
Post subject: Re: ms43 boost control issue? Posted: Fri Oct 20, 2017 9:22 pm |
|
|
| Experienced |
Joined: Wed Oct 21, 2015 6:36 am
Posts: 980
|
|
I don't think the current implementation is 100% there yet.
I had the same changes on ms41 and it was flaky and inconsistent.
Some significant work went into adjusting the code behind the scenes which has resulted in a 100% working solution.
It should be in the next ms41 xml release so for those that can wait, you'll be able to pick it apart after that.
|
|
| Top |
|
|
|
parisdog
|
Post subject: Re: ms43 boost control issue? Posted: Sat Oct 21, 2017 9:19 am |
|
|
| Newbie |
Joined: Tue Aug 09, 2016 11:19 am
Posts: 19
|
ba114 wrote: I don't think the current implementation is 100% there yet.
I had the same changes on ms41 and it was flaky and inconsistent.
Some significant work went into adjusting the code behind the scenes which has resulted in a 100% working solution.
It should be in the next ms41 xml release so for those that can wait, you'll be able to pick it apart after that. changes in ms41 code will be easy to replicate in ms43?
|
|
| Top |
|
|
|
Raziel
|
Post subject: Re: ms43 boost control issue? Posted: Thu Jul 02, 2020 12:31 pm |
|
|
| Newbie |
Joined: Mon Sep 29, 2014 10:25 am
Posts: 1
|
same situation! does anyone have some solution? version 56, Daniel file only diference is that, it works for about 2 min in active mode, after that it needs to restart engine to work again  
|
|
| Top |
|
|
|
chunky
|
Post subject: Re: ms43 boost control issue? Posted: Mon Mar 22, 2021 8:48 pm |
|
|
| Newbie |
Joined: Mon Sep 18, 2017 2:48 pm
Posts: 1
|
|
someone use this feature on ms43 with succes? i have same problem on ms430069
|
|
| Top |
|
|
|
brunobozic7
|
Post subject: Re: ms43 boost control issue? Posted: Sat May 03, 2025 2:06 pm |
|
|
| Newbie |
Joined: Sat Nov 20, 2021 11:50 am
Posts: 25
|
|
Have u guys figure it out??
|
|
| Top |
|
|
Who is online |
Users browsing this forum: No registered users and 3 guests |
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum
|
|
