Try this if you like it you can donate to
owner232x@gmail.com on paypal
https://drive.google.com/drive/folders/ ... sp=sharingRemember romraider does not like to edit these maps so use ecuflash
take the ecuflash folder in the zip and put it next to the normal definitions you use, then in the ecuflash settings set the metadata directory as that directory it will grab everything in the folder your old defs plus the merp mod defs then open the map. the ecu defs use a different cars ecu however this tune is adapted for your ecu.
this is the stock map with merp mod for the AZ1G701V ecu
let me know if you need any help
The Launch control your looking for needs these settings just remember that this is bad for your tubo and yea you can do this a bunch but eventually one day you will probably crack your uppipe or the turbo will break. i had a seal go bad and the uppipe crack on mine awhile back because of lc 2 different occasions
under merpmod timing > Launch control timing mode press the bracket keys [ ] to change the settings, change it to locked
Next, set launch control timing lock to -20 you can do -30 -40, however -20 will probably be pretty intense.
Next, under merpmod fueling > launch control fueling mode set it to locked
should be good to go on making your neighbors and local community hate you.
clutch in while stopped and in first gear you can roll slightly. floor the car more than 70% throttle and it will start. i wouldn't follow through unless you are prepared to break something one day.
