Anti lag support on some JDM STI ver 8 ECU

NeverLies · **Joined:** Mon Jul 31, 2006 5:50 pm **Posts:** 47

Will try to get a log as soon as car is available

thugangel · **Joined:** Wed Oct 07, 2009 1:01 am **Posts:** 15

Hi guys i am new here and have been reading. I just want to know what is the update on the group N map and stuff

xav · **Joined:** Sat Jan 20, 2007 5:29 pm **Posts:** 27

Does the A4TJ111B is concerned by this tread ?

ckibue · **Posted:** Thu Oct 15, 2009 3:17 am

xav wrote:

Does the A4TJ111B is concerned by this tread ?

Similar 2005 jdm 16 bit ecu and pinouts, haven't tried on one yet but I have a good feeling it will run. There's also a 2006 version of the Group N map too.

xav · **Joined:** Sat Jan 20, 2007 5:29 pm **Posts:** 27

I've open my map(A4TJ111B) with the new defs and no groupN map open...

merchgod · **Joined:** Thu Mar 30, 2006 2:38 am **Posts:** 5336

cause it's not a group N rom

xav · **Joined:** Sat Jan 20, 2007 5:29 pm **Posts:** 27

is it possible to put the groupN rom in the ecu, or is it necessary to find a GroupeN ecu ?

Turborider · **Posted:** Sun Nov 08, 2009 4:39 pm

Any update as to what is going on with this. Has there been any progress??

Paul_P1 · **Joined:** Sun Sep 14, 2008 7:53 pm **Posts:** 208

Seriously.....?

ckibue · **Posted:** Thu Nov 12, 2009 4:05 am

xav wrote:

is it possible to put the groupN rom in the ecu, or is it necessary to find a GroupeN ecu ?

I have a good feeling it might just work, if not try these from the 2006 Year, on ADA Pro hexedit, this shows as A4TJ1X00.GNCopyrightSTI2006Y as compared to the previous rom which shows as A4TJ1X00.GNCopyrightDENSO2004 starting from 0x200.
Try see and give us some logs :lol:

Turborider · **Posted:** Thu Nov 12, 2009 1:41 pm

Paul_P1 wrote:

Seriously.....?

What do you mean by this? Are you being sarcastic or are you also looking for an update too? Is all I have to do is hook up a switch to the proper pin on the ecu or is there more that needs to be done. What about the air temp sensor? Is this 100% need or will the one in the maf sensor work? I also noticed on the A4TJ1X00 that there is a fix for the speed density alternate load base compensation mode. What does this do in simply terms? Thanks for the great work done all ready.

nfn15037 · **Joined:** Mon Dec 11, 2006 3:16 am **Posts:** 109

Read the table descriptions in RR, they explain in great detail. By checking the box for speed density alternate load base compensation mode, you are cutting the load base compensation table out of the loop and use the target fueling table as a VE table.

The IAT in the MAF works and I found it handy to keep the MAF installed since you can log MAFv, this is helpful for converting your old tune to SD. Check out this thread topic5327.html for more info on ALS. And yes, it does work- http://www.youtube.com/user/agrabau#p/a/u/0/oL47-m5Q8oc action vid.

Turborider · **Posted:** Thu Nov 12, 2009 10:31 pm

Thanks for the info. That was exactly what I need to know. :mrgreen:

rex · **Joined:** Fri Sep 01, 2006 10:57 pm **Posts:** 56

ckibue wrote:

I have a good feeling it might just work, if not try these from the 2006 Year, on ADA Pro hexedit, this shows as A4TJ1X00.GNCopyrightSTI2006Y as compared to the previous rom which shows as A4TJ1X00.GNCopyrightDENSO2004 starting from 0x200.
Try see and give us some logs :lol:

Do you have a Gr. N map for A4TJ111C (2005 JDM V9 STi Spec-C)? Or if the N12 map should be ok, I'll give it a shot. Thanks a lot.

I've posted up some info in another thread about wiring the IC AUTO switch. Hope it helps.

ckibue · **Posted:** Sun Nov 15, 2009 6:06 am

rex wrote:

ckibue wrote:

I have a good feeling it might just work, if not try these from the 2006 Year, on ADA Pro hexedit, this shows as A4TJ1X00.GNCopyrightSTI2006Y as compared to the previous rom which shows as A4TJ1X00.GNCopyrightDENSO2004 starting from 0x200.
Try see and give us some logs :lol:

Do you have a Gr. N map for A4TJ111C (2005 JDM V9 STi Spec-C)? Or if the N12 map should be ok, I'll give it a shot. Thanks a lot.

I've posted up some info in another thread about wiring the IC AUTO switch. Hope it helps.

Currently only have those the 2004 and 2006 versions of the A4TJ1X00 maps, please let us know if any of them runs well on the 2005 jdm spec C. Thanks.

RomRaider

Anti lag support on some JDM STI ver 8 ECU

Who is online