RomRaider

I do have ECU ID 7412597007:

I understand now that for extended parameter to show on the logger i need to have the computer connected to the car.

Thank you.

can you please add extended parameters for this viewtopic.php?f=8&t=7730

AZ1G800L
74A2594007

Thank You!

I don't know whether this is the right place to post this, but I can't seem to log any EGT parameters using the RomRaider logger definition for my ECU (7412597007 - 2011 STi MT). Actually just use my OP2.0 and an SD card to do my logging, but it's based off of the RR logger definitions.

I've tried a few of them, specifically 0x0106 (Exhaust Gas Temperature). They just come up as a static number.

All other parameters that I've logged that are applicable to my car work great. Are the newer cars not equipped with factory EGT sensors or something?

Thanks.

only bug eye wrx 2litre non vvt had egt sensors and a few 2004/5 forester xt with the 512kb image have factory egt

The easiest way to determine which Standard SSM parameters are support by your ECU is to connect to the ECU with RomRaider Logger. After you do this the Parameter and Switch lists will be filtered such that only the items that your ECU supports will be listed. To be able to match each parameter or switch up to the logger.xml file and figure out the address to query, hover over each item with the mouse cursor. When you do this context help will appear with a P or E number. Take note of each P number as this is the id= value for the Standard SSM parameters in the logger.xml file. E is for Extended parameter.
On the switch tab S# for switches.
If EGT disappears from the list then it is not a valid parameter for your ECU.

Does the RR switch parameter list already corresponds to that ecu returns ?
It did not take place before...

Yes now with the latest version and this logger.xml file.
Second item in this logger update list: viewtopic.php?t=7755

Thanks guys, glad I'm not going crazy at least. Nice to know RR does that filtering for you as well.

You mean for editing or logging? All supported SSM parameters should be available to you. Extended parameters would need to be defined along with the editor def. Someone familiar with 16bit ECU will need to work on it.

Any updates for the above?

Thanks!

(VERSION 51) 20120118_001236
Added ECU ID: 7144345007 to extended parameters
- 2011 EDM Forester 2.0X AT EP5D004L
Corrected P87 & P88 conversion formula
Removed Extended Parameter E132 and other formatting updates (Diesel Crew update)
Added ECU ID: 6644D87407 to extended parameters (Diesel Crew update)
- 2011 EDM Impreza Turbo Diesel 2.0 6MT JZ2F422A
Added ECU ID: 6144D87407 to extended parameters (Diesel Crew update)
- 2011 EDM Forester Turbo Diesel 2.0 6MT JP3F522A
Added ECU ID: 74A2594007 to extended parameters
- 2011 SADM STi AZ1G800L

(VERSION 52) 20120118_190835
Added ECU ID: 371240A006 to extended parameters
2004 USDM Baja XT AT CAL ID: "A2WC50 "

(VERSION 53) 20120120_003952
Updated ECU ID: 74A2594007 added extended parameters E42, E54, E55
2011 SADM STi MT AZ1G800L

(VERSION 54) 20120124_142411
Added ECU ID: 8112595007 to extended parameters
2012 USDM STi MT - AE5K500V

Could someone please tell me where to place this logger.xml file? I keep selecting the file through the ECU Definition manage tab and then launch the logger. But I keep getting a window telling me to go to the interent and get the logger definition. A little guidance please.